Presentation Controls Sequoia 160
Presentation control panel and microphone are located on front lecture desk.
VCR
Push button marked VCR on presentation control panel.
Data projector will power on.
Screen control is on wall next to white board. (To your right as you face the front white board) Power on VCR/DVD unit located in front desk. (Cabinet door to your left as you face the classroom) Push VCR button for videotape playback. Insert tape. Push play.
Adjust audio levels as needed from control panel.
Off Air
Select desired channel on VCR unit.
To cancel off air channel input select line input using Remote Control.
This will project a blank screen before videotape is played.
Light Levels
Lights will adjust automatically to presentation level. About 50% of classroom level. If other light levels are desired select from presentation control panel or wall light panel.
Light levels are: Classroom = 100% (all lights)
Presentation = 50%
Demo = 75%
Dim = 25%
Computer
Push button marked computer on presentation control panel.
Data projector will power on.
Screen control is on wall next to white board. On your right as you face the white board in front of room. Turn on Computer and log into the student network.
Note: If no picture on monitor check switch box mounted on front desk right of keyboard. Select computer input #1 for classroom computer and laptop #2 for personal computer.
Shut Down Procedures * IMPORTANT! SAVE ENGERY & EQUIPMENT Push Presentation Off button on control panel when finished with data projector. Power off all equipment (computer, VCR & lights) before leaving!